Wireless speed and cadence sensor
- CYCPLUS Cycling Speed and Cadence Sensor Bluetooth & ANT+ Wireless Bike Cadence Sensor Speed IP67 Waterproof- C3 X 2SPEED SENSOR & CADENCE SENSOR- Package include: 2 pcs speed &cadence, you can use the speed and cadence sensor at the same time. BLUETOOTH & ANT+ MULTI-PROTOCOL: Supports all kinds of equipments and applications which collect speed or cadence data via Bluetooth or ANT+ ULTRA SMALL DESIGN & LONG ENDURANCE: SIZE only 38mm×29.5mm×9.5mm & WEIGHT only 9.2g. Not affect bike appearance and increase cycling burden.300 hours using time & 300 days standby time. It will enter the SLEEP MODE when not in motion. DUAL-MODE SENSOR: Quickly switch between cadence and speed sensor modes by toggling switch to different position. EASY INSTALLATION: Easily attach to your bike with included ELASTIC and DOUBLE-SIDED TAPE, no magnet or calibration needed. Excelsior quality and innovative design help you ride scientifically and healthily. Mounts to any bike's wheel hub, these sensors are easy to install, maintain and move between bikes.
- CooSpo Cadence and Speed Sensor 2 in 1 Bluetooth ANT+ Wireless RPM Cycling Cadence Sensor Bike Speed Sensor Compatible with Cycling Computer Speedometer Runtastic Pro, Zwift, UA Run, Rouvy,OpenriderCadence and Speed Sensor – Accurately tracks real-time cycling speed, cadence and distance which can be paired with your favorite cycling app and bike computers Bluetooth & Ant+ Connectivity - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones, tablets, sports watches and bike computers Powerful Compatibility - This bike speed and cadence sensor will fit with most bikes and frame sizes 3rd Party Apps Compatible – Capture critical cycling data in 3rd party apps like Runtastic Pro, Zwift, UA Run, Openrider, Endomondo, MapMyRide and more IP67 waterproof, small with a low drag profile, and comes with several of rubber bands and zip tie mounts. Low energy, equipped with a replaceable CR2032 Coin Cell Battery can be continue use up to 500hrs
- MOOFIT Speed and Cadence Sensor, Bluetooth /ANT+ Wireless Bike Cadence Sensor Cycling Speed Sensor for iPhone, Android and Bike ComputersBLE 4.0 & ANT + TECHNOLOGY - Connect the speed and cadence sensor to your bike computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth. REAL-TIME DATA - Tracking cadence /speed data in real-time on your bike computer, smartwatch, and smartphone with compatible training apps. EASY TO INSTALL - NO magnets needed, the cadence sensor attaches to the left crank of your bike, the speed sensor attaches to the wheel hub. WIDELY COMPATIBLE - The moofit speed and cadence sensor compatible with most of the mainstream fitness APPs, such as Zwift, OpenRider, E-lite HRV, RideWithGPS, Cyclemeter, Peloton, Rouvy, etc. (MooFit app Unavailable) ATTENTION: You can't pair the two sensors with the Wahoo app at the same time, because Wahoo makes the brand connection restrictions, you can only pair one sensor one time, except for Wahoo itself brand sensors.
- SKARLIE Bike Computer with Wireless Speed Cadence Sensor Bicycle Speedometer Odometer Backlight Calories for Road Bike MTB[ Speed & Cadence Sensor ] Bike Speedometer with cadence sensor. Know more about your riding data than others. When riding become more difficult, keep an eye on your RPM data changes. [ Bike Applicable ] Road bike, mountain bike, folding bike, and other common bicycles are compatible with this cycle unit. This bicycle computer MAY NOT be compatible with some electric-assist bicycles. Please do not hesitate to contact us with any questions. [ 35 Functions Bike Computer ] Backlight / Cadence / Speedometer / Average Speed / Max Speed / Speed Tendency / Speed Comparator / KM/h or MPH / Two-bike System / Trip Distance / Odometer / Trip Time / Fat Burnt / Clock / Service Program/ Freeze Fame Memory / Auto Power on off / Temperature / Waterproof and other functions. [ Easy to install ] Large clear LCD screen with backlight, two buttons, Small Size(1.8*2.4*0.8inch), Light Weight and Waterproof designed. If there is any question about installation or wheel size setting or change KM/h into MPH or data resetting, customer service is at your service all the time. [ Warranty ] Enjoy your cycling! No matter installation / using question / quality question and others, customer service center at your service all the time:)
- XOSS X1 Speed Cadence Sensor Wireless Bike Speedometer Power Meter Bike Trainer Bike Computer Use Indoor Outdoor Bike Use Zwift Peleton OpenRider- 1 Pack【Note】Single speed cadence sensor can switch between speed and cadence mode, presenting one data at a time. If you need both data at once, please purchase two. Please see the FAQ below for more notes on installation, connection, and data before purchasing. 【Dual mode of speed and cadence】You can switch the mode between speed or cadence by simply reinstalling the battery.The red light is speed mode and the blue light is cadence mode.The indicator light only flashes when the mode is just switched, not always on. 【Support ANT+ & BLUETOOTH 4.0】XOSS Sensors are compatible with all devices that support ANT+ protocol, such as Garmin, Bryton, XOSS G+ and other bike computers. And supports Bluetooth connection with apps like Openrider and bike trainer apps like Zwift, Tacx and Bkool.(Please ask the technical support of your APP and ANT+ device to confirm if it is compatible.) 【Powerful XOSS APP Support】XOSS cadence sensor are supported by the powerful XOSS APP with accurate data and are also compatible with most fitness APP. Note: The cadence and speed sensors cannot be used with the XOSS Bike Computer and XOSS APP for indoor training, it can be used outdoors. 【Waterproof and light, easy to install】IP67 level waterproof,you can ride when rain day. Only 10g, very light and easy to carry.Please check the tutorial video on the product detail page.Please watch FAQ below for additional notes before purchasing, and feel free to contact us with questions.19.99 $
- Magene S3+ Cycling Cadence Or Speed Sensor - ANT+ and Bluetooth 4.0 Compatible - Wireless Sensor for Bikes - Compatible with Zwift, Garmin, & MoreUse the Magene S3+ sensor to accurately track cycling cadence or speed in real-time. Connects to your ANT+ & Bluetooth 4.0 devices to provide key data in your favorite cycling apps. Check out the manual for helpful setup tips. Use the Magene Utility App for initial setup. Then the S3+ is compatible with most ANT+ & Bluetooth 4.0 devices. Works with Zwift, Garmin, Bryton, iGPSPORT, Onelap, BKool, TACX, and more. Bluetooth connection works with smartphones & bike computers. Send us a message on Amazon if you'd like to confirm compatibility with your device. Lightweight design Installs easily on your bike's crank arm or wheel hub with the included rubber-elastic rings. Connect the sensor to the crank arm for cadence tracking, or to the wheel hub for speed measurements. Note: Sensor can't be installed on the wheel of spin bikes, so speed tracking is not compatible with spinning bikes. Sensor can be used as a cadence or speed sensor. Just reinsert the battery to quicky changes modes. The green light means speed mode, and the red indicates cadence tracking. Want to track both at once? Grab a 2 pack and record both cadence and speed. Simultaneously record data on multiple devices with this cadence/speed sensor. Data transmits in 3 seconds to keep you informed while riding. Track all your rides with the 400-500h battery life. IP66 rating makes this sensor water and dust-proof.
- KE LIN Bicycle 2 in 1 Speed Cadence Sensor, BessieSparks - ANT+ Wireless Bluetooth 4.0 Bike Computer, IP67 Waterproof for iOS Android APPs Practical Cycling Enthusiasts (Bicycle Sensor)🎁【Shockproof and Waterproof】Our bicycle sensor is perfectly suitable for driving on rough roads. It allows you to learn more about your bike data and enjoy effective exercise. Waterproof IP67, you can ride a bike every day in any weather. ★【Bluetooth 4.0, ANT+ Multiprotocol Technology】Supports various devices and applications that collect speed or rhythm data via Bluetooth or ANT +. Track your bike speed rhythm and distance via wireless transmission. Save your ride data in real time. 🎄【Mini Body, Easy to Install】Lightweight and easy to install, no magnet. Attached to the bicycle's crank or shoe (including the base). 🎁【APP wireless connection】The monitor will start up automatically, and synchronously display the video from rearview camera when you're backing your car; and it will close itself after backing. Screen will cut to rearview camera automatically while you're backing the car and change back to the original scene after backup. No signal display blue screen: Automatically enter the standby state after 5 minutes, effectively extend the life of the display; Key Product Features ♥【Service and quality assurance】We assure customers that our products are subject to stringent inspection and quality. Please feel free to contact us if there is any problem with the products, we will provide 90-DAYS WARRANTY and AFTER-SALES SERVICE.
- Magene Outdoor Speed/Cadence Sensor for Cycling, Wireless Bluetooth/Ant+ Bike Computer RPM Sensor, Compatible with Wahoo Fitness, Strava[Battery] Remove the insulating sheet of the pre-installed battery before usage; re-install the battery to switch between the speed and cadence mode. [Mode] 1 sensor can ONLY select one mode (Speed or Cadence) at the one time.So you need 2 sensors to test both speed and cadence.(1 for speed,1 for cadence) [Device] When using the Bluetooth protocol 1 sensor can ONLY connect to 1 APP or device concurrently; When using ANT+ protocol it can be connected to multiple devices at the same time. [Connection] When using a smart phone APP, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is invalid. [Hibernation] S3+ sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY start sending broadcasts after it is properly woken-up.
- MEILAN Blade Wireless Bike Computer Cycling Computer with Backlight Speed Cadence Sensor Included Bluetooth ANT+ 80 Hours Battery 2.5in Screen Bicycle Computer Road Bike Waterproof M4[Wireless Connection]- With Bluetooth BLE4.0 and ANT + wireless connection, you can connect external devices: heart rate monitor (Blade does not support 5.3kHZ heart rate monitor), Power meter, speed / cadence sensor, etc. to obtain more accurate data, so as to plan your exercise plan reasonably. NOTE: BLADE has updated the accessories of mount, Old and new accessories package will be delivered randomly by Amazon warehouse. [2.5-inch anti-glare large screen]- Which can be clearly displayed from all angles under the sunlight. White backlight, 2-level brightness which is adjustable. High grade IML anti-scratch mirror, large screen display, which assures that data in high-speed operation can still be seen clearly at a glance. [Battery life]- up to 80 hours after full charged, suitable for long-ride. USB rechargeable, can be charged by using any charging device with USB DC 5V port. A set of Bluetooth BLE4.0 wireless speed / cadence sensor is included in the package of Blade. Installation notes of sensor: 1, The sensor and magnet must be fixed firmly. 2, After installation, please make sure that the gap between the corresponding speed sensor and cadence sensing part and the corresponding magnets does not exceed 2cm. 3, There are two small triangles on the sensor. Please make sure that the triangle is aligned with the center of the cadence magnet and speed magnet. BLADE NOT for: Spin bikes, indoor sports bikes, indoor bikes and some bikes have a larger flat-fork span or short crank. If you find that the sensor and Blade cannot be paired, please contact seller for a software upgrade. If you have any questions, please contact us and Meilan ensure to solve your problems quickly and accurately, offer you excellent customer services.
- CooSpo Cadence Sensor Bluetooth4.0 ANT+ Cycling Cadence Bike Speed Sensor Wireless RPM Bicycle Cadence Sensor for Bike Computer Rouvy, Zwift, Openrider, PelotonRPM Cycling Sensor - Track and capture real-time cycling cadence or speed data on your bike computer or smartphone with compatible training apps Cadence or Speed Sensor – Reput the battery, it will switch between rpm cadence and speed mode. Cadence sensor attaches on crank, blue LED will light up for three seconds on the panel. Speed sensor mounts on the axle with red LED light up for three seconds on panel. Two modes CAN NOT function at the same time Bluetooth & Ant+ Connectivity - Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Waterproof IP67 App Compatible & Battery Life - Work with popular training app including Zwift, Rouvy, RidewithGPS, Peloton, Openrider, TrainerRoad. CR2032 replaceable coin cell battery. Lasts up to 12 months. No recharging Lightweight and Non-Magnetic – Total weight is 9.5g only, easy to install. It comes with rubber pad and different size O-ring to help you better fix it on bike. Wireless and non-magnetic, it wouldn't be recommended to use on SPIN bikes